Updated November 2026. Written by the Watchdog Locksmiths team in Greenford, West London. Our locksmiths are DBS-checked and our work carries a 12-month guarantee on parts and labour.

Key takeaways

  • The most common cause of a handle that will not lift or a key that will not turn is a door that has dropped slightly on its hinges, so the lock keeps catching on the frame.
  • Try lifting the door as you turn the key, check the keeps, and use a dry PTFE or silicone lubricant on the moving parts.
  • If the handle is loose, the key turns freely without locking, or you are locked in or out, the gearbox or cylinder has probably failed and needs a locksmith.
  • On our 2026 price list, a failed gearbox mechanism is from £129.99 and a full mechanism from £249.99.

Most modern front and back doors in London homes are uPVC doors with a multipoint lock. When they work, you barely notice them. When they fail, the door can be stuck shut with you outside, or worse, stuck open and unsecured. This guide explains why uPVC door locks go wrong, what you can safely check yourself and when to call a locksmith.

How a uPVC multipoint lock works

When you lift the handle, a long bar inside the edge of the door slides hooks, bolts and rollers into keeps in the frame at several points. A gearbox in the middle of the bar connects the handle and the euro cylinder to that mechanism. Turning the key then locks the whole system. Because several parts have to line up perfectly, small problems with the door or frame often show up as a stiff or failing lock.

Why won’t my uPVC door handle lift?

  • The door has dropped. Hinges loosen over time, the door sags and the hooks no longer meet the keeps cleanly.
  • Misaligned keeps. Frame keeps can shift or be set too tight.
  • A seized or dirty mechanism. Dust, old grease and corrosion can make the bar stiff.
  • A failed gearbox. If the handle feels floppy, or moves freely without the bolts moving, the gearbox or handle spindle may have broken.

Why won’t my key turn?

If the key goes in but will not turn, the first thing to check is whether the door is fully closed and the handle is lifted. If it still will not turn, the cylinder may be worn, the cam may be jammed or the door may be under tension from misalignment. Do not force the key: a key that snaps in the lock makes the job harder. Our guide to what to do when a key snaps in the lock explains why.

Safe things you can try yourself

  1. Lift the door slightly by the handle as you turn the key, to see whether the weight of the door is the cause.
  2. Look at the keeps on the frame for visible damage or misalignment.
  3. Tighten loose hinge and handle screws and, if you are comfortable, use the hinge adjustment screws (usually turned with an Allen key) to lift a sagging door.
  4. Spray a dry PTFE or silicone lubricant on the hooks, rollers and latch. Avoid thick oil or grease, which attracts dirt.

If none of that helps, stop. Forcing a faulty multipoint lock can break the gearbox and leave the door locked shut, or cause damage that turns a repair into a replacement.

When to call a locksmith

  • The handle is loose, limp or has come off.
  • The key turns freely but the door does not lock.
  • You are locked in or out because the mechanism has seized.
  • The cylinder is old and not anti-snap. In that case it is worth upgrading while the door is open. See our guide to euro cylinder snapping.

What does a uPVC lock repair cost?

From our 2026 price list: door opening on a failed mechanism is £69.99, a replacement gearbox lock mechanism is from £129.99 and a full mechanism replacement is from £249.99. We will confirm the likely cost for your door before starting work. See the full price list and our London locksmith price guide.

Frequently asked questions

Can I fix a uPVC door lock myself?

You can safely tighten screws, adjust hinges and lubricate the moving parts. Replacing a gearbox or a full mechanism needs the right parts and a locksmith, because the wrong replacement can leave the door unsecured.

Why is my uPVC door handle stiff?

A stiff handle is usually caused by a sagging door, a dry or dirty mechanism or misaligned keeps. If it is getting worse, get it checked before the gearbox fails completely.

Is it safe to leave a door that will not lock?

No. A door that does not lock fully is not secure and may also affect your home insurance. Call a locksmith the same day. In an emergency we can fit a temporary gearbox so the door is secure until the permanent repair.

Do I need a whole new door if the lock fails?

Almost never. In most cases only the gearbox, handle or cylinder needs replacing. A new door is only needed when the frame or door itself is damaged.

Locked out, or a uPVC lock failing?

Contact Watchdog Locksmiths or send us a photo on WhatsApp and we will give you a clear quote before any work starts.

Sources and further reading

Author

  • Paramjit Singh Bhogal

    Paramjit Singh Bhogal is Operations Director at Watchdog Locksmiths, with a background in fire, security and locksmithing. Involved in Watchdog’s locksmith services since 2012, Paramjit oversees technical and field operations, supporting the team with complex lock and door problems, installations and security upgrades. His practical expertise covers lock replacement, anti-snap cylinders, key control, master-key systems and UK security standards including TS007, BS 3621 and PAS 24. Working across residential and commercial properties in London and Hertfordshire, Paramjit believes effective security starts by assessing the complete door and recommending the right solution for the property and its individual security requirements.